(888) 268-6396
ISO 9001:2015 Certified Company
Corporate Headquarters
607 N. Central Ave
Wood Dale, IL 60191
We have Branch Offices located across the United States.
Custom products are Tempco’s specialty. Browse our portfolio below for inspiration.
Custom shroud system with Ceramic Band Heaters for the Plastics Processing Industry
Compact cast circulation heater used in fuel cell testing equipment
Mid-sized cast circulation heater used for testing aerospace subcomponents
Large-sized cast circulation heater used in hot water, high pressure washer system
Tempco can manufacture a wide variety of sizes for Cool to the Touch systems and Finned Aluminum Cast-in Heaters
Half round Ceramic Fiber Heater
Dual element heater system with controller containing 8 CRH E-Mitters and 8 CRZ E-mitters
Custom ARV Array housing assembly designed with KTG E-mitters
Heater array with Ceramic E-mitters, handles and mounting brackets
Ceramic E-mitter heating array
Irregular shaped, non-metal sheath strip heater
Ring heater with mounting holes
Ring heater with mounting holes
Two Piece Ring heater with mounting holes
Dome Heater with Boot Hook Mounting
Heater vulcanized to a metal plate is mounted in a refrigeration unit to minimize condensation within the control panel (metal component also supplied by Tempco)
Heater manifold 3D formed for use on a snow making machine
Formed heater used to remove condensation on a vacuum canister
Long heater design (up to 12')
Heater vulcanized to the shaft in the base of a weather vane is used for freeze protection (machined parts also available from Tempco)
Silicone Rubber Drum Heaters come in a variety of sizes. Tempco also manufactures 5, 15 and 30 gallon drum heaters.
Small heater used to remove condensation in a gas filter is designed with two holes, two slits and Velcro® for easy installation while filter is in use
Formed heater with six thermocouples for six-zone control used to refurbish airplane propellers by applying heat to cure an epoxy compound that attaches a new nickel lead edge to the propeller blade
Heater vulcanized to black anodized aluminum for food-prep station (metal component also supplied by Tempco)
Tightly wound tubular heater with flange
Custom heater design with two mounting flanges
During application these tubular heaters are placed facing each other forming a tunnel around a pipe to gradually apply less and less heat to prevent sudden exposure to ambient air.
Heater formed in circular pattern
Heater formed in circular pattern
Custom heater array for an application requiring infrared heat
Finned Tubular Heating Elements can be manufactured in-house to virtually any shape or size, even elements 17ft long.
Flanged Immersion Heaters used to heat tanks as part of the micro brewing process.
Heater for high temperature application where the electrical housing is separated from the heater flange to lower the ambient temperature of the electrical wiring
Application specific with foldback bends
Heater with NEMA housing; NEMA 4 (moisture resistant), NEMA 7 (explosion resistant) and NEMA 12 (dust resistant) are all available
90KW skid mounted fuel circulation system for heating in waste reduction management
Metal tube over-the-side chemical bath heater
Custom flange heater for Sanitary Process Solutions
A basin sump-pump heater with float switch, for use on construction excavation sites
Thermocouple
Thermocouple
Pipe clamp thermocouple
Magnet thermocouple
Thermocouple
Thermocouple
Thermocouple
RTD
Thermocouple
Thermistor
Thermistor
Thermistor
137.5" long Thermocouple 5 x Multipoint for simulating a nuclear reactor
Thermocouple
Outdoor control panel with NEMA 4 construction and enclosure heater for a 1,000 gallon water holding tank with internal temperature control
Used in paint curing for decorative landscaping rocks and stone
Outdoor control panel with NEMA 4 construction and enclosure heater for a 1,000 gallon water holding tank with internal temperature control
Portable heat treat system with Ramp/Soak TEC Temperature Controllers and additional electronics mounted in a custom sized portable stainless steel cabinet to power silicone rubber heating elements
Control Panel for a 90KW skid mounted fuel circulation system for heating in waste reduction management
304 Stainless Steel, NEMA 4x control panel featuring a thermostat-controlled, side-mounted air conditioner that maintains safe interior temperatures for the electronic components while operating in high outdoor ambient temperatures
High limit Panel with 8 zones and top beacon warning light
NEMA 4 control panel with alarm light and window protection kit for controlling paraffin wax tank heaters.
Custom two-zone control panel designed with TEC-9100 controller, type J thermocouple, electronic timer and wall or bench mounting options
Tubular heater with custom mounting flange
Large Diameter Flanged Air Heater
Long conical two-piece heater
Fully flexible one-piece heater with varying width
Heater with large cutout at gap and clearance holes