Wire and Termination Protection

Temperature Range: -70°C to 180°C (-94°F to 356°F)

Order by the foot: 50 ft. minimum The fiberglass sleeving is first annealed to remove all organic matter and then uniformly coated with highly abrasion-resistant silicone rubber, which provides an excellent secondary insulation for greater dielectric strength and added protection against abrasion and wire contamination.

Order by the foot: 50 ft. minimum

MaterialStainless Steel or Galvanized Steel Used to protect lead wire against abrasion or physical damage in hazardous environments; provides protection from excessive flexing.

Order by the foot: 50 ft. minimum Used to protect lead wire against abrasion or physical damage in hazardous environments.

Can be field retrofit or factory installed on Mica Band Heaters, Ceramic Band Heaters, Mi-Plus® Band Heaters and Mica Strip Heaters. (Other style boxes such as PVC, drawn aluminum or, explosion-proof are available.) For use on Standard T3 Screw Termination with 10-32 studs.

Terminal mounting centers: 7/8″

Two Knockouts: 1/2″ conduit, One on each side

Part Number: HSGR-1149

Can be field retrofit or factory installed on Mica Band Heaters, Ceramic Band Heaters, Mi-Plus® Band Heaters and Mica Strip Heaters. (Other style boxes such as PVC, drawn aluminum or, explosion-proof are available.) For use on Standard T2 Screw Termination with 10-32 studs.

Terminal mounting centers: 7/8″

Two Knockouts: 1/2″ conduit, One on each side

Part Number: HSGR-1013

Can be field retrofit or factory installed on Mica Band Heaters, Ceramic Band Heaters, Mi-Plus® Band Heaters and Mica Strip Heaters.

Part Numbers: Box HSGR-1005 with EHDR-1001 cup assembly. For use on Standard T3 Screw Termination with 10-32 studs.

Terminal mounting centers: 7/8″

Part Number: EHDR-1002

Can be field retrofit or factory installed on Mica Band Heaters, Ceramic Band Heaters, Mi-Plus® Band Heaters and Mica Strip Heaters.

Part Numbers: Box HSGR-1005 with EHDR-1231 cup assembly. For use on Standard T3 Screw Termination with 10-32 studs.

Terminal mounting centers: 7/8″

Part Number: EHDR-1227

Can be field retrofit or factory installed on Channel Strip Heaters and Finned Channel Strip Heaters. (Other style boxes such as PVC, drawn aluminum or, explosion-proof are available.) For use on Standard T3 Screw Termination with 10-32 studs.

Terminal mounting centers: 3/4″

One Knockout: 1/2″ conduit, One as shown

Part Number: HSGR-1008

Can be field retrofit or factory installed on Channel Strip Heaters and Finned Channel Strip Heaters. (Other style boxes such as PVC, drawn aluminum or, explosion-proof are available.) For use on Standard T2 Screw Termination with 10-32 studs.

Terminal mounting centers: 3/4″

Two Knockouts: 1/2″ conduit, One on each side

Part Number: HSGR-1068